【求助】急问版主学不会游泳的鱼

langzijcy

怎样才能在曲面上施加均布荷载。另外flac能不能进行坐标变换。

学不会游泳的鱼

在曲面上加荷用fish可以做到的，
  
坐标变换我没有接触过，有没有其他的网友接触过啊，

langzijcy

谢谢版主，我想问一下，你有没有这方面的例子
我想看看fish是怎样做到的。

langzijcy

今天在看flac使用手册时，发现下面这段命令不能执行：
def input parameters ; interactive input
zcentuna = in(’Height of Center of Tunnel A :’)
zradtuna = in(’Radius of Tunnel A :’)
zcentunb = in(’Height of Center of Tunnel B :’)
zradtunb = in(’Radius of Tunnel B :’)
ff_height = in(’Far field height above crown :’)
ff_depth = in(’Far field depth below base :’)
ff_len_a = in(’Length of Tunnel A from intersection :’)
ff_len_b = in(’Length of Tunnel B from intersection :’)
zone_x_a = in(’Number of Zones for Tunnel A Width :’)
zone_x_b = in(’Number of Zones for Tunnel B Width :’)
zone_z_a = in(’Number of Zones for Tunnel A Length :’)
zone_z_b = in(’Number of Zones for Tunnel B Length :’)
zone_y_tun = in(’Number of Zones for Height of Tunnels :’)
zone_ff_a = in(’Number of Zones above Tunnels :’)
zone_ff_b = in(’Number of Zones below Tunnels :’)
zone_rat_a = in(’Zone Ratio along length of Tunnel A :’)
zone_rat_b = in(’Zone Ratio along length of Tunnel B :’)
zone_rat_z = in(’Zone Ratio above and below Tunnels :’)
end
希望版主和各位高手，能够帮助看看是什么问题。
谢谢了

qinjianshe

再试这个：
def input_parameters ; interactive input  
zcentuna = in(’Height of Center of Tunnel A :’)  
zradtuna = in(’Radius of Tunnel A :’)  
zcentunb = in(’Height of Center of Tunnel B :’)  
zradtunb = in(’Radius of Tunnel B :’)  
ff_height = in(’Far field height above crown :’)  
ff_depth = in(’Far field depth below base :’)  
ff_len_a = in(’Length of Tunnel A from intersection :’)  
ff_len_b = in(’Length of Tunnel B from intersection :’)  
zone_x_a = in(’Number of Zones for Tunnel A Width :’)  
zone_x_b = in(’Number of Zones for Tunnel B Width :’)  
zone_z_a = in(’Number of Zones for Tunnel A Length :’)  
zone_z_b = in(’Number of Zones for Tunnel B Length :’)  
zone_y_tun = in(’Number of Zones for Height of Tunnels :’)  
zone_ff_a = in(’Number of Zones above Tunnels :’)  
zone_ff_b = in(’Number of Zones below Tunnels :’)  
zone_rat_a = in(’Zone Ratio along length of Tunnel A :’)  
zone_rat_b = in(’Zone Ratio along length of Tunnel B :’)  
zone_rat_z = in(’Zone Ratio above band below Tunnels :’)  
end  
  
原因：专用名词慎用于其它

qinjianshe

也可以这样：
  
def input_parameters ; interactive input  
zcentuna = in('Height of Center of Tunnel A :')  
zradtuna = in('Radius of Tunnel A :')  
zcentunb = in('Height of Center of Tunnel B :')  
zradtunb = in('Radius of Tunnel B :')  
ff_height = in('Far field height above crown :')  
ff_depth = in('Far field depth below base :')  
ff_len_a = in('Length of Tunnel A from intersection :')  
ff_len_b = in('Length of Tunnel B from intersection :')  
zone_x_a = in('Number of Zones for Tunnel A Width :')  
zone_x_b = in('Number of Zones for Tunnel B Width :')  
zone_z_a = in('Number of Zones for Tunnel A Length :')  
zone_z_b = in('Number of Zones for Tunnel B Length :')  
zone_y_tun = in('Number of Zones for Height of Tunnels :')  
zone_ff_a = in('Number of Zones above Tunnels :')  
zone_ff_b = in('Number of Zones below Tunnels :')  
zone_rat_a = in('Zone Ratio along length of Tunnel A :')  
zone_rat_b = in('Zone Ratio along length of Tunnel B :')  
zone_rat_z = in('Zone Ratio above and below Tunnels ')  
end  
原因分析： 引号格式错误

langzijcy

这个引号为什么加上会有这么大的影响
能不能解释一下，谢谢。