本帖最后由 gox.vn 于 2013-1-17 15:18 编辑
大家好 我模拟大坝施工过程中上演。我使用命令ekill和ealive控制阶段，使用命令ANTYPE，,rest 步骤1和他人。 但这样的结果，这不是我期望的东西..最终的结果是在给定的相同的结果，这是只由一个上演 这是怎么回事呢？请帮我 作为理论，，如果大坝是通过多级，最大位移出现在约1/3坝高。我的结果是不一样的，。我不知道我错了哪一步。
hello everyboy I'm simulating dam staged construction process. I usecommand ekill and ealive to control stage, and use command antype,,rest torelate step1 and others. But the result, it's not my expectation things .. The finalresult is the same result which is given by only one staged What's wrong? Please help me As theory, if dam is constructed by multi stages, themaximum displacement'll appear in about 1/3 height of dam. And my result isn't same that. I don’t knowwhich step I'm wrong. Here is my code
| 
IP卡
狗仔卡
发表于 2013-1-17 15:12:37
提升卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡