【原创】请问一下出现以下问题的原因

djwndxzn

The requested element edge length of 2.320526194E-05 along line 7 at    keypoint 9 is not satisfied.  Actual edge length = 1.E-03.   
   
Element heat generations are not valid for element 3.                    
  The BFE command is ignored.           
           
  Element 713 detects an unusual pattern of load type HGEN.  A default     
  setting of 7.888609052E-31 is used on unspecified parts of the           
  element.