退出号4031

wenge

Unable to obtain the memory requested during a dynamic
             memory request. This can be due to the following reasons:
            
             1) The maximum allowed amount of memory is exceeded.
                This is specified by the MAXSIZE variable in the include
                file in the tools directory in the MSC.Marc
                install directory.  MAXSIZE specifies the memory in
                million words, multiply by 4 to get the amount in
                megabytes.
            
             2) There is not enough free memory on the system.
                If the memory available is not enough for an in-core
                solution, MSC.Marc will attempt to perform the
                solution out-of-core. In this case, some data which
                normally would be stored in memory is stored on the hard
                disk (which could slow down the analysis considerably).
                The memory request will fail if there is still not enough
                memory for the analysis.
计算过程中产生的DUMP文件有1.3G大小，一步都没有计算就complete了
是2个部件的接触分析。模型中有一个 rbe3，如果删了rbe3就可以计算了，真不搞明白为什么啊？
大家帮帮忙啊，谢谢！

ritalong

我也碰到过这样的问题，是不是没有空间？但是空间明明足够呀

yandejun

是内存不足，硬盘存储空间不够也有出现过。

zhuran

试试out of core

leoathit

请问这个问题解决了吗？我也遇到过，但不知如何解决，望不吝赐教。

Apple-tree

按错误提示情况把内存设大些，硬盘空间多留些
我原来也遇到过，不过不记得怎么解决了