我做的接触分析例子

weisaner

都是小牛牛

shaoguangjun

谢谢分享

chenjia900

这个错误我最近也一直遇到，原因可能就是刚性位移，接触单元之间并不是接触在一起的，而有间隙或渗透，而这在ansys中是不允许的。实体模型是接触的，但划分网格以后并没有接触。
这是我在一个PPT上刚看到的：
三个高级接触特性允许调整初始接触条件以防止刚体模式：
(1).自动CONF调整
程序计算CNOF以清除间隙。
(2).初始接触环（ICONT）
将调整带内接触表面上的节点移到目标面上
(3).初始允许穿透范围
(PMIN & PMAX）：将刚体表面移动到接触面上

xueliang123

不错,学习学习

qiang52199

自由度溢出，肯定是约束不足。楼主好好检查约束

ZHOUYI

我做的是牙轮钻头轴承密封的接触有限元分析，选择1/2模型做轴对称分析，径向不能移动，只能施加轴向位移，几何模型的径向尺寸就必须和装配后的一样，橡胶圈会和轴承有过盈配合，几何模型应该怎样处理？

hhhh8888

谢谢分享!

fengerchai

不是很理解你的意思，你可以传张图示意一下好吗？

卜小佟2008

请问刚柔接触怎么建立？
我是这样做的：在没有建立接触对时，只把柔性体划分网格，然后建立接触对，接触对建好后对刚形体划分网格，可是之后又变成柔柔接触了，请问这样有什么问题吗？
还有是不是要建ploit节点？

卜小佟2008

/COM,ANSYS RELEASE  9.0    UP20041104       16:28:46    09/27/2008
*** WARNING ***                         CP =      14.688   TIME= 17:04:53
Shape testing revealed that 1 of the 643 new or modified elements      
violate shape warning limits.  To review test results, please see the   
output file or issue the CHECK command.                                 
*** WARNING ***                         CP =      16.469   TIME= 17:06:08
Shape testing revealed that 2 of the 1875 new or modified elements      
violate shape warning limits.  To review test results, please see the   
output file or issue the CHECK command.                                 
*** WARNING ***                         CP =      35.094   TIME= 17:15:03
Previous testing revealed that 2 of the 3062 selected elements violate  
shape warning limits.  To review warning messages, please see the      
output or error file, or issue the CHECK command.                       
*** WARNING ***                         CP =      35.219   TIME= 17:15:07
Out of the 3482 defined elements, only 3062 elements are selected.      
*** WARNING ***                         CP =      36.766   TIME= 17:15:11
Coefficient ratio exceeds 1.0e8 - Check results.                        
*** WARNING ***                         CP =      38.375   TIME= 17:15:13
The calculated reference FORCE CONVERGENCE VALUE = 5.893974036E-04 is   
less than 1E-2 a threshold zero, A value of 1E-2 or specified MINREF   
is used.  Check results carefully.                                      
*** WARNING ***                         CP =      42.531   TIME= 17:15:18
The calculated reference FORCE CONVERGENCE VALUE = 1.097803185E-03 is   
less than 1E-2 a threshold zero, A value of 1E-2 or specified MINREF   
is used.  Check results carefully.                                      
*** WARNING ***   SUPPRESSED MESSAGE    CP =      46.641   TIME= 17:15:22
The calculated reference FORCE CONVERGENCE VALUE = 1.560247626E-03 is   
less than 1E-2 a threshold zero, A value of 1E-2 or specified MINREF   
is used.  Check results carefully.                                      
*** WARNING ***   SUPPRESSED MESSAGE    CP =      50.656   TIME= 17:15:26
The calculated reference FORCE CONVERGENCE VALUE = 2.13716082E-03 is   
less than 1E-2 a threshold zero, A value of 1E-2 or specified MINREF   
is used.  Check results carefully.                                      
*** WARNING ***   SUPPRESSED MESSAGE    CP =      54.703   TIME= 17:15:31
The calculated reference FORCE CONVERGENCE VALUE = 3.18311691E-03 is   
less than 1E-2 a threshold zero, A value of 1E-2 or specified MINREF   
is used.  Check results carefully.                                      
*** WARNING ***   SUPPRESSED MESSAGE    CP =      58.703   TIME= 17:15:35
The calculated reference FORCE CONVERGENCE VALUE = 4.386348256E-03 is   
less than 1E-2 a threshold zero, A value of 1E-2 or specified MINREF   
is used.  Check results carefully.                                      
*** WARNING ***   SUPPRESSED MESSAGE    CP =      62.734   TIME= 17:15:39
The calculated reference FORCE CONVERGENCE VALUE = 5.494579243E-03 is   
less than 1E-2 a threshold zero, A value of 1E-2 or specified MINREF   
is used.  Check results carefully.                                      
*** WARNING ***   SUPPRESSED MESSAGE    CP =      66.781   TIME= 17:15:44
The calculated reference FORCE CONVERGENCE VALUE = 6.604674645E-03 is   
less than 1E-2 a threshold zero, A value of 1E-2 or specified MINREF   
is used.  Check results carefully.                                      
*** WARNING ***   SUPPRESSED MESSAGE    CP =      70.688   TIME= 17:15:48
The calculated reference FORCE CONVERGENCE VALUE = 7.818237532E-03 is   
less than 1E-2 a threshold zero, A value of 1E-2 or specified MINREF   
is used.  Check results carefully.                                      
*** WARNING ***   SUPPRESSED MESSAGE    CP =      74.750   TIME= 17:15:52
The calculated reference FORCE CONVERGENCE VALUE = 9.118117926E-03 is   
less than 1E-2 a threshold zero, A value of 1E-2 or specified MINREF   
is used.  Check results carefully.                                      
这些错误代码是什么意思？请大家帮忙看一下

卜小佟2008

这是我的分析结果，中间那个是Y型密封圈，周围的三个蓝色面是全约束，下面的面有个向上的位移，密封圈与周围面是刚柔接触，可是结果却没有接触，密封圈上没有任何应力
请高手帮帮忙

fengerchai

1、要建ploit节点
2、网格划分的不好；载荷有问题。
3、你这个模型是2d的？有命令流吗？估计是你的接触没有设置好

卜小佟2008

/BATCH  
! /COM,ANSYS RELEASE  9.0    UP20041104       10:48:39    09/27/2008              
/input,menust,tmp,'',,,,,,,,,,,,,,,,1   
! /GRA,POWER  
! /GST,ON
! /PLO,INFO,3
! /GRO,CURL,ON
! /CPLANE,1   
! /REPLOT,RESIZE  
WPSTYLE,,,,,,,,0
! /REPLOT,RESIZE  
/PREP7  
!*  
ET,1,PLANE42
!*  
ET,2,HYPER56
!*  
KEYOPT,1,1,0
KEYOPT,1,2,0
KEYOPT,1,3,1
KEYOPT,1,5,0
KEYOPT,1,6,0
!*  
KEYOPT,2,3,1
KEYOPT,2,4,0
KEYOPT,2,5,0
KEYOPT,2,7,0
KEYOPT,2,8,0
!*  
!*  
MPTEMP,,,,,,,,  
MPTEMP,1,0  
MPDATA,EX,1,,210e9  
MPDATA,PRXY,1,,0.3  
MPTEMP,,,,,,,,  
MPTEMP,1,0  
MPDATA,EX,2,,184e9  
MPDATA,PRXY,2,,0.3  
MPTEMP,,,,,,,,  
MPTEMP,1,0  
MPDATA,EX,3,,103e9  
MPDATA,PRXY,3,,0.35
MPTEMP,,,,,,,,  
MPTEMP,1,0  
MPDATA,EX,4,,2.8e6  
MPDATA,PRXY,4,,0.498
TB,MOON,4,1,9,  
TBTEMP,0
TBDATA,,0.293,0.177,,,,
TBDATA,,,,,,,   
FINISH  
/SOL
FINISH  
/PREP7  
K,1,0,0.5,,
K,2,0,19.27837,,
K,3,3.51953,19.27837,,  
K,4,3.51953,0.5,,   
LSTR,       1,       2  
LSTR,       2,       3  
LSTR,       3,       4  
LSTR,       4,       1  
FLST,2,4,4  
FITEM,2,1   
FITEM,2,2   
FITEM,2,3   
FITEM,2,4   
AL,P51X
K,5,11.01953,0,,
FLST,2,2,8  
FITEM,2,11.05,-0.5E-01,0
FITEM,2,5,0.8,0
CIRCLE,P51X, , , ,180, ,
FLST,2,2,4,ORDE,2   
FITEM,2,5   
FITEM,2,-6  
LDELE,P51X  
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /USER,  1   
! /FOC,   1,   8.63480845071    ,   8.65520279916    ,   0.00000000000
! /REPLO  
! /FOC,   1,   10.8761229728    ,   8.32781977908    ,   0.00000000000
! /REPLO  
! KPLOT   
! /PNUM,KP,1  
! /PNUM,LINE,0
! /PNUM,AREA,0
! /PNUM,VOLU,0
! /PNUM,NODE,0
! /PNUM,TABN,0
! /PNUM,SVAL,0
! /NUMBER,0   
!*  
! /PNUM,ELEM,0
! /REPLOT
!*  
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
FLST,2,3,3,ORDE,2   
FITEM,2,6   
FITEM,2,-8  
KDELE,P51X  
FLST,2,2,8  
FITEM,2,11.5,-0.35,0
FITEM,2,6.1,2.25,0  
CIRCLE,P51X
FLST,2,4,4,ORDE,2   
FITEM,2,5   
FITEM,2,-8  
LDELE,P51X  
K,6,18.3103,0,,
FLST,2,4,3,ORDE,2   
FITEM,2,6   
FITEM,2,-9  
KDELE,P51X  
K,6,18.3103,0,,
FLST,2,2,8  
FITEM,2,11.25,0,0   
FITEM,2,18.45,-0.15,0   
CIRCLE,P51X
FLST,2,4,4,ORDE,2   
FITEM,2,5   
FITEM,2,-8  
LDELE,P51X  
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! KPLOT   
FLST,2,4,3,ORDE,2   
FITEM,2,7   
FITEM,2,-10
KDELE,P51X  
FLST,2,2,8  
FITEM,2,11.1,-0.15,0
FITEM,2,18.35,0.6,0
CIRCLE,P51X
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
FLST,2,4,4,ORDE,2   
FITEM,2,5   
FITEM,2,-8  
LDELE,P51X  
! KPLOT   
FLST,2,3,3,ORDE,3   
FITEM,2,6   
FITEM,2,8   
FITEM,2,-9  
KDELE,P51X  
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
FLST,2,2,3,ORDE,2   
FITEM,2,7   
FITEM,2,10  
KDELE,P51X  
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
K,7,3.72896,0,,
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
K,6,18.31031,0,,
!*  
LARC,6,7,3,7.29057,
!*  
LARC,6,7,5,7.29057,
K,8,11.01953,7.29057,,  
LARC,       6,       8,       7
LDELE,       5  
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
LARC,       6,       7,       8
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /PNUM,KP,1  
! /PNUM,LINE,1
! /PNUM,AREA,0
! /PNUM,VOLU,0
! /PNUM,NODE,0
! /PNUM,TABN,0
! /PNUM,SVAL,0
! /NUMBER,0   
!*  
! /PNUM,ELEM,0
! /REPLOT
!*  
! LPLOT   
LSTR,       7,       6  
FLST,2,2,4  
FITEM,2,6   
FITEM,2,5   
AL,P51X
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
K,9,3.51953,9.81354,,   
K,10,3.51953,5.23638,,  
K,11,3.96704,4.73914,,  
K,12,4.29259,4.81753,,  
! APLOT   
! KPLOT   
LSTR,       9,      10  
LARC,      10,      12,      11
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
K,13,9.54162,8.23956,,  
K,14,9.60598,8.30517,,  
K,15,9.65509,8.44899,,  
LSTR,      12,      13  
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! LPLOT   
! KPLOT   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /ANG,   1,   15.0000000000  
! /REPLO  
! /VIEW,1,,,1
! /ANG,1  
! /REP,FAST   
LARC,      13,      15,      14
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! LPLOT   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
K,16,9.65509,10.56354,,
K,17,9.71387,10.72458,,
K,18,9.90509,10.81354,,
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! KPLOT   
LSTR,      15,      16  
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
LARC,      18,      16,      17
! /DIST,1,0.924021086472,1
! /REP,FAST   
! LPLOT   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! LPLOT   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! KPLOT   
! LPLOT   
K,19,12.13397,10.81354,,
K,20,12.35459,10.68113,,
K,21,12.38397,10.56354,,
K,22,12.38397,8.44899,,
K,23,12.41447,8.32931,,
K,24,12.49743,8.23956,,
K,25,17.74646,4.81753,,
K,26,18.07202,4.73914,,
K,27,18.51953,5.23638,,
K,28,18.51953,9.81354,,
K,29,11.01953,17.31354,,
LSTR,      18,      19  
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
LARC,      21,      19,      20
LSTR,      21,      22  
LARC,      22,      24,      23
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /ANG,   1, -0.299999999998  
! /REPLO  
! /DIST,  1,   6.78790732257  
! /ANG,   1,  -25.2000000000  
! /REPLO  
! /VIEW,1,,,1
! /ANG,1  
! /REP,FAST   
! /FOC,   1,   13.1059505283    ,   7.82890859087    ,   0.00000000000
! /REPLO  
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
LSTR,      24,      25  
LARC,      25,      27,      26
LSTR,      27,      28  
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
LARC,      28,       9,      29
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
K,30,6.6059,15.87736,,  
K,31,15.43315,15.87736,,
LARC,      29,       9,      30
LARC,      28,      29,      31
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! LPLOT   
FLST,2,15,4
FITEM,2,7   
FITEM,2,8   
FITEM,2,9   
FITEM,2,10  
FITEM,2,11  
FITEM,2,12  
FITEM,2,13  
FITEM,2,14  
FITEM,2,15  
FITEM,2,16  
FITEM,2,17  
FITEM,2,18  
FITEM,2,19  
FITEM,2,21  
FITEM,2,20  
AL,P51X
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! APLOT   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
K,32,3.91953,19.27837,,
K,33,3.91953,14.3346,,  
K,34,4.25863,13.86119,,
K,35,4.83203,14.05203,,
K,36,17.20703,14.05203,,
K,37,17.78042,13.86119,,
K,38,18.11953,14.3346,,
K,39,18.11953,19.27837,,
LSTR,      32,      33  
LARC,      33,      35,      34
! KPLOT   
LARC,      36,      29,      35
LDELE,      24  
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
LARC,      29,      35,      30
LARC,      36,      29,      31
LARC,      36,      38,      37
LSTR,      38,      39  
LSTR,      39,      32  
FLST,2,7,4  
FITEM,2,22  
FITEM,2,23  
FITEM,2,24  
FITEM,2,25  
FITEM,2,26  
FITEM,2,27  
FITEM,2,28  
AL,P51X
! APLOT   
K,40,18.51953,19.27837,,
K,41,22.03906,19.27837,,
K,42,22.03906,0.5,,
K,43,18.51953,0.5,,
LSTR,      40,      41  
LSTR,      41,      42  
LSTR,      42,      43  
LSTR,      43,      40  
FLST,2,4,4  
FITEM,2,29  
FITEM,2,30  
FITEM,2,31  
FITEM,2,32  
AL,P51X
! APLOT   
! SAVE, one,db,
! SAVE, one,db,
! /DIST,1,0.924021086472,1
! /REP,FAST   
! SAVE, one,db,
FINISH  
! /EXIT,MODEL   
! /COM,ANSYS RELEASE  9.0    UP20041104       20:44:50    09/27/2008              
! SAVE, one,db,
FINISH  
! /EXIT,MODEL   
! /COM,ANSYS RELEASE  9.0    UP20041104       10:10:51    09/28/2008              
/POST1  
FINISH  
/PREP7  
CM,_Y,AREA  
ASEL, , , ,       1
CM,_Y1,AREA
CMSEL,S,_Y  
!*  
CMSEL,S,_Y1
AATT,       1, ,   1,       0,  
CMSEL,S,_Y  
CMDELE,_Y   
CMDELE,_Y1  
!*  
/UI,MESH,OFF
WPSTYLE,,,,,,,,0
FLST,5,2,4,ORDE,2   
FITEM,5,1   
FITEM,5,3   
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,50, , , , ,1
!*  
FLST,5,2,4,ORDE,2   
FITEM,5,2   
FITEM,5,4   
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,10, , , , ,1
!*  
MSHAPE,0,2D
MSHKEY,0
!*  
/UI,MESH,OFF
WPSTYLE,,,,,,,,0
CM,_Y,AREA  
ASEL, , , ,       1
CM,_Y1,AREA
CHKMSH,'AREA'   
CMSEL,S,_Y  
!*  
AMESH,_Y1   
!*  
CMDELE,_Y   
CMDELE,_Y1  
CMDELE,_Y2  
!*  
! APLOT   
CM,_Y,AREA  
ASEL, , , ,       5
CM,_Y1,AREA
CMSEL,S,_Y  
!*  
CMSEL,S,_Y1
AATT,       2, ,   1,       0,  
CMSEL,S,_Y  
CMDELE,_Y   
CMDELE,_Y1  
!*  
FLST,5,2,4,ORDE,2   
FITEM,5,30  
FITEM,5,32  
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,50, , , , ,1
!*  
FLST,5,2,4,ORDE,2   
FITEM,5,29  
FITEM,5,31  
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,10, , , , ,1
!*  
CM,_Y,AREA  
ASEL, , , ,       5
CM,_Y1,AREA
CHKMSH,'AREA'   
CMSEL,S,_Y  
!*  
AMESH,_Y1   
!*  
CMDELE,_Y   
CMDELE,_Y1  
CMDELE,_Y2  
!*  
! APLOT   
FLST,5,2,5,ORDE,2   
FITEM,5,2   
FITEM,5,4   
CM,_Y,AREA  
ASEL, , , ,P51X
CM,_Y1,AREA
CMSEL,S,_Y  
!*  
CMSEL,S,_Y1
AATT,       3, ,   1,       0,  
CMSEL,S,_Y  
CMDELE,_Y   
CMDELE,_Y1  
!*  
FLST,5,1,4,ORDE,1   
FITEM,5,5   
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,30, , , , ,1
!*  
FLST,5,1,4,ORDE,1   
FITEM,5,6   
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,20, , , , ,1
!*  
CM,_Y,AREA  
ASEL, , , ,       2
CM,_Y1,AREA
CHKMSH,'AREA'   
CMSEL,S,_Y  
!*  
AMESH,_Y1   
!*  
CMDELE,_Y   
CMDELE,_Y1  
CMDELE,_Y2  
!*  
! APLOT   
FLST,5,1,4,ORDE,1   
FITEM,5,28  
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,20, , , , ,1
!*  
FLST,5,2,4,ORDE,2   
FITEM,5,22  
FITEM,5,27  
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,10, , , , ,1
!*  
FLST,5,2,4,ORDE,2   
FITEM,5,23  
FITEM,5,26  
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,3, , , , ,1  
!*  
FLST,5,2,4,ORDE,2   
FITEM,5,24  
FITEM,5,-25
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,10, , , , ,1
!*  
CM,_Y,AREA  
ASEL, , , ,       4
CM,_Y1,AREA
CHKMSH,'AREA'   
CMSEL,S,_Y  
!*  
AMESH,_Y1   
!*  
CMDELE,_Y   
CMDELE,_Y1  
CMDELE,_Y2  
!*  
! APLOT   
CM,_Y,AREA  
ASEL, , , ,       3
CM,_Y1,AREA
CMSEL,S,_Y  
!*  
CMSEL,S,_Y1
AATT,       4, ,   2,       0,  
CMSEL,S,_Y  
CMDELE,_Y   
CMDELE,_Y1  
!*  
FLST,5,2,4,ORDE,2   
FITEM,5,20  
FITEM,5,-21
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,20, , , , ,1
!*  
FLST,5,2,4,ORDE,2   
FITEM,5,7   
FITEM,5,19  
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,10, , , , ,1
!*  
FLST,5,2,4,ORDE,2   
FITEM,5,8   
FITEM,5,18  
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,3, , , , ,1  
!*  
FLST,5,2,4,ORDE,2   
FITEM,5,9   
FITEM,5,17  
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,10, , , , ,1
!*  
FLST,5,3,4,ORDE,3   
FITEM,5,11  
FITEM,5,13  
FITEM,5,15  
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,5, , , , ,1  
!*  
FLST,5,4,4,ORDE,4   
FITEM,5,10  
FITEM,5,12  
FITEM,5,14  
FITEM,5,16  
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y   
!*  
LESIZE,_Y1, , ,2, , , , ,1  
!*  
CM,_Y,AREA  
ASEL, , , ,       3
CM,_Y1,AREA
CHKMSH,'AREA'   
CMSEL,S,_Y  
!*  
AMESH,_Y1   
!*  
CMDELE,_Y   
CMDELE,_Y1  
CMDELE,_Y2  
!*  
/UI,MESH,OFF
FLST,5,8,4,ORDE,4   
FITEM,5,7   
FITEM,5,-9  
FITEM,5,17  
FITEM,5,-21
CM,_Y,LINE  
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,S,_Y  
CMDELE,_Y   
!*  
!*  
LREFINE,_Y1, , ,2,1,1,1
CMDELE,_Y1  
!*  
FINISH  
/SOL
FINISH  
/PREP7  
!*  
!*  
!*  
!*  
! /COM, CONTACT PAIR CREATION - START
CM,_NODECM,NODE
CM,_ELEMCM,ELEM
CM,_KPCM,KP
CM,_LINECM,LINE
CM,_AREACM,AREA
CM,_VOLUCM,VOLU
! /GSAV,cwz,gsav,,temp
MP,MU,3,0.2
MAT,3   
MP,EMIS,3,7.88860905221e-031
R,3
REAL,3  
ET,3,169
ET,4,172
R,3,,,1.0,0.1,0,
RMORE,,,1.0E20,0.0,1.0,
RMORE,0.0,0,1.0,,1.0,0.5
RMORE,0,1.0,1.0,0.0,,1.0
KEYOPT,4,3,0
KEYOPT,4,4,0
KEYOPT,4,5,0
KEYOPT,4,7,0
KEYOPT,4,8,0
KEYOPT,4,9,0
KEYOPT,4,10,1   
KEYOPT,4,11,0   
KEYOPT,4,12,1   
KEYOPT,4,2,1
! Generate the target surface   
LSEL,S,,,3  
CM,_TARGET,LINE
TYPE,3  
NSLL,S,1
ESLN,S,0
ESURF   
CMSEL,S,_ELEMCM
! Generate the contact surface  
LSEL,S,,,7  
CM,_CONTACT,LINE
TYPE,4  
NSLL,S,1
ESLN,S,0
ESURF   
ALLSEL  
ESEL,ALL
ESEL,S,TYPE,,3  
ESEL,A,TYPE,,4  
ESEL,R,REAL,,3  
! /PSYMB,ESYS,1   
! /PNUM,TYPE,1
! /NUM,1  
! EPLOT   
ESEL,ALL
ESEL,S,TYPE,,3  
ESEL,A,TYPE,,4  
ESEL,R,REAL,,3  
CMSEL,A,_NODECM
CMDEL,_NODECM   
CMSEL,A,_ELEMCM
CMDEL,_ELEMCM   
CMSEL,S,_KPCM   
CMDEL,_KPCM
CMSEL,S,_LINECM
CMDEL,_LINECM   
CMSEL,S,_AREACM
CMDEL,_AREACM   
CMSEL,S,_VOLUCM
CMDEL,_VOLUCM   
! /GRES,cwz,gsav  
CMDEL,_TARGET   
CMDEL,_CONTACT  
! /COM, CONTACT PAIR CREATION - END   
!*  
!*  
! /COM, CONTACT PAIR CREATION - START
CM,_NODECM,NODE
CM,_ELEMCM,ELEM
CM,_KPCM,KP
CM,_LINECM,LINE
CM,_AREACM,AREA
CM,_VOLUCM,VOLU
! /GSAV,cwz,gsav,,temp
MP,MU,4,0.2
MAT,4   
MP,EMIS,4,7.88860905221e-031
R,4
REAL,4  
ET,5,169
ET,6,172
R,4,,,1.0,0.1,0,
RMORE,,,1.0E20,0.0,1.0,
RMORE,0.0,0,1.0,,1.0,0.5
RMORE,0,1.0,1.0,0.0,,1.0
KEYOPT,6,3,0
KEYOPT,6,4,0
KEYOPT,6,5,0
KEYOPT,6,7,0
KEYOPT,6,8,0
KEYOPT,6,9,0
KEYOPT,6,10,1   
KEYOPT,6,11,0   
KEYOPT,6,12,1   
KEYOPT,6,2,1
! Generate the target surface   
LSEL,S,,,32
CM,_TARGET,LINE
TYPE,5  
NSLL,S,1
ESLN,S,0
ESURF   
CMSEL,S,_ELEMCM
! Generate the contact surface  
LSEL,S,,,19
CM,_CONTACT,LINE
TYPE,6  
NSLL,S,1
ESLN,S,0
ESURF   
ALLSEL  
ESEL,ALL
ESEL,S,TYPE,,5  
ESEL,A,TYPE,,6  
ESEL,R,REAL,,4  
! /PSYMB,ESYS,1   
! /PNUM,TYPE,1
! /NUM,1  
! EPLOT   
ESEL,ALL
ESEL,S,TYPE,,5  
ESEL,A,TYPE,,6  
ESEL,R,REAL,,4  
CMSEL,A,_NODECM
CMDEL,_NODECM   
CMSEL,A,_ELEMCM
CMDEL,_ELEMCM   
CMSEL,S,_KPCM   
CMDEL,_KPCM
CMSEL,S,_LINECM
CMDEL,_LINECM   
CMSEL,S,_AREACM
CMDEL,_AREACM   
CMSEL,S,_VOLUCM
CMDEL,_VOLUCM   
! /GRES,cwz,gsav  
CMDEL,_TARGET   
CMDEL,_CONTACT  
! /COM, CONTACT PAIR CREATION - END   
!*  
!*  
! /COM, CONTACT PAIR CREATION - START
CM,_NODECM,NODE
CM,_ELEMCM,ELEM
CM,_KPCM,KP
CM,_LINECM,LINE
CM,_AREACM,AREA
CM,_VOLUCM,VOLU
! /GSAV,cwz,gsav,,temp
MP,MU,5,0.2
MAT,5   
MP,EMIS,5,7.88860905221e-031
R,5
REAL,5  
ET,7,169
ET,8,172
R,5,,,1.0,0.1,0,
RMORE,,,1.0E20,0.0,1.0,
RMORE,0.0,0,1.0,,1.0,0.5
RMORE,0,1.0,1.0,0.0,,1.0
KEYOPT,8,3,0
KEYOPT,8,4,0
KEYOPT,8,5,0
KEYOPT,8,7,0
KEYOPT,8,8,0
KEYOPT,8,9,0
KEYOPT,8,10,1   
KEYOPT,8,11,0   
KEYOPT,8,12,1   
KEYOPT,8,2,1
! Generate the target surface   
LSEL,S,,,5  
CM,_TARGET,LINE
TYPE,7  
NSLL,S,1
ESLN,S,0
ESURF   
CMSEL,S,_ELEMCM
! Generate the contact surface  
LSEL,S,,,8  
LSEL,A,,,9  
LSEL,A,,,17
LSEL,A,,,18
CM,_CONTACT,LINE
TYPE,8  
NSLL,S,1
ESLN,S,0
ESURF   
ALLSEL  
ESEL,ALL
ESEL,S,TYPE,,7  
ESEL,A,TYPE,,8  
ESEL,R,REAL,,5  
! /PSYMB,ESYS,1   
! /PNUM,TYPE,1
! /NUM,1  
! EPLOT   
ESEL,ALL
ESEL,S,TYPE,,7  
ESEL,A,TYPE,,8  
ESEL,R,REAL,,5  
CMSEL,A,_NODECM
CMDEL,_NODECM   
CMSEL,A,_ELEMCM
CMDEL,_ELEMCM   
CMSEL,S,_KPCM   
CMDEL,_KPCM
CMSEL,S,_LINECM
CMDEL,_LINECM   
CMSEL,S,_AREACM
CMDEL,_AREACM   
CMSEL,S,_VOLUCM
CMDEL,_VOLUCM   
! /GRES,cwz,gsav  
CMDEL,_TARGET   
CMDEL,_CONTACT  
! /COM, CONTACT PAIR CREATION - END   
!*  
!*  
! /COM, CONTACT PAIR CREATION - START
CM,_NODECM,NODE
CM,_ELEMCM,ELEM
CM,_KPCM,KP
CM,_LINECM,LINE
CM,_AREACM,AREA
CM,_VOLUCM,VOLU
! /GSAV,cwz,gsav,,temp
MP,MU,6,0.2
MAT,6   
MP,EMIS,6,7.88860905221e-031
R,6
REAL,6  
ET,9,169
ET,10,172   
R,6,,,1.0,0.1,0,
RMORE,,,1.0E20,0.0,1.0,
RMORE,0.0,0,1.0,,1.0,0.5
RMORE,0,1.0,1.0,0.0,,1.0
KEYOPT,10,3,0   
KEYOPT,10,4,0   
KEYOPT,10,5,0   
KEYOPT,10,7,0   
KEYOPT,10,8,0   
KEYOPT,10,9,0   
KEYOPT,10,10,1  
KEYOPT,10,11,0  
KEYOPT,10,12,1  
KEYOPT,10,2,1   
! Generate the target surface   
LSEL,S,,,23
LSEL,A,,,24
LSEL,A,,,25
LSEL,A,,,26
CM,_TARGET,LINE
TYPE,9  
NSLL,S,1
ESLN,S,0
ESURF   
CMSEL,S,_ELEMCM
! Generate the contact surface  
LSEL,S,,,20
LSEL,A,,,21
CM,_CONTACT,LINE
TYPE,10
NSLL,S,1
ESLN,S,0
ESURF   
ALLSEL  
ESEL,ALL
ESEL,S,TYPE,,9  
ESEL,A,TYPE,,10
ESEL,R,REAL,,6  
! /PSYMB,ESYS,1   
! /PNUM,TYPE,1
! /NUM,1  
! EPLOT   
ESEL,ALL
ESEL,S,TYPE,,9  
ESEL,A,TYPE,,10
ESEL,R,REAL,,6  
CMSEL,A,_NODECM
CMDEL,_NODECM   
CMSEL,A,_ELEMCM
CMDEL,_ELEMCM   
CMSEL,S,_KPCM   
CMDEL,_KPCM
CMSEL,S,_LINECM
CMDEL,_LINECM   
CMSEL,S,_AREACM
CMDEL,_AREACM   
CMSEL,S,_VOLUCM
CMDEL,_VOLUCM   
! /GRES,cwz,gsav  
CMDEL,_TARGET   
CMDEL,_CONTACT  
! /COM, CONTACT PAIR CREATION - END   
! /MREP,EPLOT
FINISH  
/SOL
ANTYPE,0
NLGEOM,1
NSUBST,30,100,10
OUTRES,ERASE
OUTRES,ALL,1
AUTOTS,1
TIME,1  
! APLOT   
FLST,2,3,5,ORDE,3   
FITEM,2,1   
FITEM,2,4   
FITEM,2,-5  
!*  
/GO
DA,P51X,ALL,0   
FLST,2,1,5,ORDE,1   
FITEM,2,2   
!*  
/GO
DA,P51X,UX,0
FLST,2,1,5,ORDE,1   
FITEM,2,2   
!*  
/GO
DA,P51X,UY,1.5  
! /STATUS,SOLU
SOLVE   
FINISH  
/POST1  
! PLDISP,2
!*  
! /EFACET,1   
! PLNSOL, S,EQV, 0,1.0
! SAVE, one,db,
! SAVE, one,db,
! EPLOT   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
FINISH  
/PREP7  
/UI,MESH,OFF
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
FINISH  
/SOL
FLST,2,3,5,ORDE,3   
FITEM,2,1   
FITEM,2,4   
FITEM,2,-5  
!*  
/GO
DA,P51X,ALL,0   
! LPLOT   
! APLOT   
! DALIS, ALL  
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,0.924021086472,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1

! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! /DIST,1,1.08222638492,1
! /REP,FAST   
! LGWRITE,'a','lgw','F:\analyse\nonline\NEWMOD~2\one\9CC0D~1.27(\',COMMENT  

这是我的命令流
请帮我看看，谢谢！

gufubin7669

好东东，谢谢搂主

junclever

你可以通过select菜单下的entities命令选择你想显示的提和面，再replot就ＯＫ了

guanghui7

下载下来，向楼主学习一下

justyou

感谢啊，下来看看

bajybj

多谢楼主

baiansys

我也正在做轴承接触分析呢，正好看看。。

steel0112

谢谢楼主，好好看看,刚开始接触，一头雾水啊！