- 积分
- 0
- 注册时间
- 2010-12-14
- 仿真币
-
- 最后登录
- 1970-1-1
|
s1.ArcByCenterEnds(center=(25.0, 15.0), point1=(25.0, 25.0), point2=(25.0,
5.0), direction=CLOCKWISE)
s1.Line(point1=(25.0, 25.0), point2=(25.0, 5.0))
s1.VerticalConstraint(entity=g[4], addUndoState=False)
s1.PerpendicularConstraint(entity1=g[3], entity2=g[4], addUndoState=False)
s1.ConstructionLine(point1=(25.0, 15.0), angle=90.0)
s1.CoincidentConstraint(entity1=v[2], entity2=g[5], addUndoState=False)
s1.VerticalConstraint(entity=g[5], addUndoState=False)
s1.delete(objectList=(g[2], ))
p = mdb.models['Model-1'].Part(name='Part-1', dimensionality=THREE_D,
type=DEFORMABLE_BODY)
p = mdb.models['Model-1'].parts['Part-1']
p.BaseSolidRevolve(sketch=s1, angle=360.0, flipRevolveDirection=OFF)
s1.unsetPrimaryObject()
p = mdb.models['Model-1'].parts['Part-1']在这命令中只能有一对坐标,,要是在三维空间建立n个这样子的球体的怎么办啊?谁能给个思路,后者是指教个命令或例子什么啊。。。。谢谢 |
|