如何把iSIGHT的perl5.6升级为5.8

zbbpearl

在集成CFX11.0的时候出现以下错误：

An internal error has been detected in cfx5pre

Unexpected error

  Can't locate object method "spawn" via package "job" (perhaps you forgot to load "job"?) at C:\Program Files\Ansys Inc\v110\CFX\bin\/perllib/CFX5/Win32/Commands.pm line 140.

while working out CFX5_HOST_ARCH

The following information may be useful to CFX support staff:

        Currently at C:\Program Files\Ansys Inc\v110\CFX\bin\/perllib/CFX5/CurrentConfig.pm line 203
        CFX5::CurrentConfig::getconf('CFX5_HOST_ARCH') called at C:\Program Files\Ansys Inc\v110\CFX\bin\/perllib/CFX5/DefaultConfig.pm line 148
        CFX5:efaultConfig::getconf_or_interr('CFX5_HOST_ARCH') called at C:\Program Files\Ansys Inc\v110\CFX\bin\/perllib/CFX5/DefaultConfig.pm line 906
        CFX5::DefaultConfig::CFX_SITEFILE('CFX_SITEFILE') called at C:\Program Files\Ansys Inc\v110\CFX\bin\/perllib/CFX5/CurrentConfig.pm line 179
        eval {...} called at C:\Program Files\Ansys Inc\v110\CFX\bin\/perllib/CFX5/CurrentConfig.pm line 177
        CFX5::CurrentConfig::getconf('CFX_SITEFILE') called at C:\Program Files\Ansys Inc\v110\CFX\bin\/perllib/CFX5/Config.pm line 108
        CFX5::Config::read_config() called at C:\Program Files\Ansys Inc\v110\CFX\bin\perllib\cfx5pre.pl line 186

An internal error has been detected in cfx5pre

Unexpected error

  Aborting due to internal error: "Unexpected error
  Can't locate object method "spawn" via package "job" (perhaps you forgot to load "job"?) at C:\Program Files\Ansys Inc\v110\CFX\bin\/perllib/CFX5/Win32/Commands.pm line 140.

while working out CFX5_HOST_ARCH". while working out CFX_SITEFILE

The following information may be useful to CFX support staff:

        Currently at C:\Program Files\Ansys Inc\v110\CFX\bin\/perllib/CFX5/CurrentConfig.pm line 203
        CFX5::CurrentConfig::getconf('CFX_SITEFILE') called at C:\Program Files\Ansys Inc\v110\CFX\bin\/perllib/CFX5/Config.pm line 108
        CFX5::Config::read_config() called at C:\Program Files\Ansys Inc\v110\CFX\bin\perllib\cfx5pre.pl line 186

Aborting due to internal error: "Unexpected error
  Aborting due to internal error: "Unexpected error
  Can't locate object method "spawn" via package "job" (perhaps you forgot to load "job"?) at C:\Program Files\Ansys Inc\v110\CFX\bin\/perllib/CFX5/Win32/Commands.pm line 140.
while working out CFX5_HOST_ARCH".
while working out CFX_SITEFILE".

个人认为是iSIGHT的perl版本太低的缘故。已经用过了重置环境变量的方法但是还是发生错误。请教各位大哥如何才能把iSIGHT的perl从5.6升级到5.8。

[ 本帖最后由 zbbpearl 于 2008-4-19 19:44 编辑 ]

zcowry

，版主帮忙看一下吧，很急啊！谢谢！谢谢！

zbbpearl

难道没人集成过cfx11.0吗？ 老提示perl.exe遇到问题需要关闭，很无奈啊！请各位大侠救救我吧

jane8802

别哭了，去下载一个cfx11的更新包装下，然后用cfx的perl覆盖isight的