- 积分
- 0
- 注册时间
- 2010-4-12
- 仿真币
-
- 最后登录
- 1970-1-1
|
发表于 2011-8-12 09:45:09
|
显示全部楼层
来自 北京
回复 16# apogee724
These models can be used with elements in Abaqus/Standard that include mechanical behavior (elements that have displacement degrees of freedom), except some beam elements in space. Beam elements in space that include shear stress caused by torsion (i.e., not thin-walled, open sections) and do not include hoop stress (i.e., not PIPE elements) cannot be used. In Abaqus/Explicit the kinematic hardening models can be used with any elements that include mechanical behavior, with the exception of one-dimensional elements (beams and trusses) when the models are used with the Hill yield surface |
|