Geometry Interface Support for Windows |
|
|
|
|
|
|
|
|
Reader/Plug-In | Version of CAD Package | Windows 2000 (Service Pack 2, Version 5.00, Build 2195) | Windows XPl | Windows XP x64 |
Intel IA32 Windows | Intel IA32 Windows | EM64T, AMD64 |
Reader for ACIS (SAT) | ACIS 16 | x | x | x |
Reader for Parasolid | Parasolid 18.0 | x | x | x |
Reader for CATIA for Simulation only | CATIA V4 | x | x | |
Reader for CATIA V5 | CATIA V5 (R2–R16) | x | x | |
CADNEXUS/CAPRI CAE Gateway | CATIA V5 (R14–R17) | x | x | |
CADNexus/CAPRI CAE Gateway | CATIA V5 (R16, R17) | | | x |
Reader for IGES | IGES 4.0, 5.2, 5.3 | x | x | |
Reader for STEP | AP203, | x | x | |
AP214 |
Reader/Plug-In for Solid Edge | Solid Edge Version 18.0 | x | x | |
Solid Edge Version 19.0 | x | x | |
Plug-In for Solid Edge | Solid Edge Version 19.0 | | | x** |
Reader/Plug-In for SolidWorks | SolidWorks 2006 SP5 | x | x | x |
SolidWorks 2007 | x | x | x |
Reader/Plug-In for Autodesk | Inventor R10 | x | x | |
Inventor R11 | x | x | |
Plug-In for Autodesk | Inventor R11 | | | x** |
Reader/Plug-In for Pro/ENGINEER | Pro/ENGINEER Wildfire 2 | x | x | x |
Pro/ENGINEER Wildfire 3 | x | x | x |
Reader/Plug-In for Unigraphics | Unigraphics NX 3.0 | x | x | |
Unigraphics NX 4.0 | x | x | x |
Reader/Plug-In for Mechanical Desktop | Mechanical Desktop 2006 | x | x | |
Mechanical Desktop 2007 | x | x | |
Plug-In for Mechancial Desktop | Mechanical Desktop 2007 | | | x** |
Reader/Plug-In for OneSpace Designer | OneSpace Designer Modeling 2005 (Rev. 13.20) | x | x | |
OneSpace Designer Modeling 2006 (Rev. 14.0) | x | x | x |
Plug-In for TeamCenter Engineering | TcEng 9.1.2 with UGNX3 | x | x | |
TcEng 9.1.3 with UGNX4 |
|
|
|
|
|
|
x = supported |
|
|
|
|
* Associativity not maintained upon refresh. |
|
|
|
** 32–bit CAD support only. |
|
|
|
|