自己建的模型如何导入皮带？

umpump

如题，自己建立的模型，两个分离的pulley如何导入皮带？至今没搞明白，求高手指教！

umpump

1.     Open up RecurDyn

2.     Create a new belt subsystem

3.     Import your Parasolid geometry into that subsystem

4.     Rotate the geometry about the Y-axis and translate the geometry so that the belt can be created in the X-Y plane, with a Z value of zero.

5.     Create a roller at each pulley hub and create a flange for each side of each pulley

6.     Set the assembly radius for each pulley to represent the starting position of the belt on each pulley

7.     Define the V-belt segment.

8.     Assemble the belt system around the two pulleys

9.     Add the appropriate constraints to fix the motion of the flanges appropriately

10.  Adjust the belt parameters as well as the belt-to-flange contact parameters

11.  Add the motion or force inputs into the pulleys.

12.  Run the simulation.

shengmeng

你已经做成功了是吗？