在做温度场分析时出现了这样的警告！请大家帮忙分析一下原因

lijm114

1）The value of TEMP at node 1810 is 126659504.  It is greater than the   
current limit of 1000000.  This generally indicates rigid body motion   
as a result of an unconstrained model.  Verify that your model is      
properly constrained.   
2）Both solid model and finite element model boundary conditions have been
applied to this model.  As solid loads are transferred to the nodes or  
elements, they can overwrite directly applied loads.
3）The value of TEMP at node 1810 is 126659504.  It is greater than the   
current limit of 1000000.  This generally indicates rigid body motion   
as a result of an unconstrained model.  Verify that your model is      
properly constrained.

liujin2000161

我也出现过这类警告，对于1。3条，你的热源模型有问题，对于第二条对结果没多大影响！

lijm114

liujin2000161 ，请具体说明一下，“热源模型有问题“是网格划分的问题么？还是其他的方面。我的qq:121821859
这个问题很棘手，希望你可以多多赐教。

liujin2000161

热源分布或者网格划分的问题

cj_hmily

１，３条应该是你在同一个位置产生了至少两个节点，用一下nummrg,node试试

xujijin_79

有可能是你设置材料参数的单位不同意，加的HGEN值太大，生成的温度过高

blank326

是边界条件没有加，收敛不了。前几天我也是这个错误。

lijm114

谢谢大家提出的意见，上面几个警告已经解决，可是现在又出现了新的警告：“Material property HF of material 1 is evaluated at a temperature of 0,   which is below the supplied temperature range.  Temperature range  checking terminates.“ 再请大家分析一下这个是什么原因造成的。万分感谢！

lijm114

还有，再帮朋友请教一下，如果出现这个警告：“Shape testing revealed that 1 of the 1050 new or modified elements  violate shape warning limits.  To review test results, please see the  output file or issue the CHECK command. “会对结果有什么样的影响？

liujin2000161

Material property HF of material 1 is evaluated at a temperature of 0,   which is below the supplied temperature range.  Temperature range  checking terminates.“先看看HF设置是否合适，初始温度的大小！
“Shape testing revealed that 1 of the 1050 new or modified elements  violate shape warning limits.  To review test results, please see the  output file or issue the CHECK command. “计算应力场可能会导致不收敛!建议重新划分网阁,或改换合适的单元!